Facade cleaning cannot be priced by multiplying the area by a rate. Two buildings with the same facade area can differ severalfold in the cost of the work: one has existing anchor points on the roof, while the other has none; one has ordinary city dust, while the other still bears traces of construction work from two years ago.
That is why we start with a site visit. It takes little time and costs less than an estimate prepared from photographs and revised on the third day of work. Photographs of the facade and the address can provide an initial indication, but the final terms are set after the site visit.

Types of sites
Business centres with panoramic glazing
Shopping centres and retail premises
Hotels
Banks and administrative buildings
Industrial and warehouse buildings with glazed sections
Facades with composite and ventilated systems
Scope of work
Site visit
We assess the facade material, the type and age of the dirt, the height, available anchor points and access routes to the work area.
Agreeing access and the schedule
We determine the access method, work area boundaries, barriers and working hours. We agree these arrangements with the site's facilities team.
Preparing the work area
We cordon off the area below the facade, notify the facilities team and, where necessary, arrange temporary closures of walkways and parking spaces.
Cleaning the glazing
We select the cleaning solution to suit the facade material. Where a streak-free result matters, we use demineralised water.
Cleaning frames, profiles and joints
We clean areas usually left untouched when only the glass is washed: profiles, window ledges, joints and visible fixings.
Reviewing the result
We review the cleaned areas together with the person responsible on the site side.
Handover and cleanup
We remove the barriers, tidy the work area and provide photographs on request.
What is not included
- Glazing repairs and replacement of glass units and seals
- Sealing joints between panels and repairing leaksThis is a separate service with a different scope of work and different materials.
- Installing and dismantling structures on the facade
- Cleaning windows from inside the premisesThis is arranged separately, as it requires access to premises and coordination with tenants.
- Removing residues from construction workCement, paint, expanding foam and marks left by an angle grinder require a separate assessment and are not included in routine cleaning.
- Work in conditions the crew assesses as unsafe following the site visit
Access methods
We choose the access method to suit the site, not the other way around. Methods are often combined on one building: rope access for upper levels and ground-level access for entrance areas and canopies.
Industrial rope access
The main method for most facades. It requires suitable anchor points on the roof or parapet, which we check during the site visit. It takes up no space below the building and does not block vehicle access, making it suitable for sites in densely built-up areas with heavy traffic.
Facade access platform
We use this where extended work is needed in one area or the facade structure does not allow rope access to be arranged safely.
Truck-mounted aerial platform
We bring one in as needed for lower levels, canopies and areas that cannot be reached from above. It requires space for positioning and agreed vehicle access.
What affects the cost
The cost is determined after the site visit and recorded in the contract.
Glazed area and number of storeys
Facade material: glass, composite, metal or stone
Type of dirt and time since the last cleaning
Access method and availability of suitable anchor points
Site operating hours: daytime, night shifts or weekends
Frequency: one-off cleaning or maintenance under contract
Season and available weather window
Need for coordination with the facilities team or tenants, or to close vehicle access
Safety and documents
Work at height requires documented qualifications, equipment in working order and an organised work area. The area below the facade is cordoned off for the duration of the work.
Qualifications
A valid industrial rope access qualification document and medical clearance are mandatory requirements for the crew we bring to the site. Documents are checked before work begins.
Liability
Liability to the client under the contract is insured. The crew we engage is responsible for occupational safety and workers' clearances; we check these before the crew goes to the site.
Documents for the site
We provide a document package covering the crew roster, qualification documents and confirmation of the safety briefing.
Work arrangements
A site-specific briefing is held before work begins, and the work area is agreed with the person responsible at the site.
Frequently asked questions
Does the site need to close during cleaning?
Generally, no. We cordon off only the work area below the section of facade being cleaned and move it as work progresses. If the area affects an entrance or parking, we agree the schedule in advance: some work can be moved to a night shift or a weekend.
How often does the facade need cleaning?
It depends on the building's location and material. A facade facing a busy street gets dirty noticeably faster than one facing a courtyard. It is easier to set the frequency after the first cleaning, when the rate at which dirt returns becomes clear. Regular maintenance under contract costs less than one-off visits because it does not require the removal of ingrained dirt.
Do you work in winter?
Yes, we work in winter: Tashkent has many clear winter days suitable for work at height. Work is postponed in wind, snow or icy conditions, based on safety conditions. We agree any postponement in advance as far as the forecast allows.
Can I get a price from photographs?
Photographs and an address can provide an initial indication of the cost. But anchor points, the condition of joints and the actual type of dirt are not visible in photographs, and these determine the scope of work. The final terms are therefore set after the site visit.
What if there are comments on the result?
Comments are recorded at handover: we review the cleaned areas with the person responsible at the site before removing the equipment. The procedure and time frames for addressing comments are specified in the contract and are proportionate to the scope of work.
Do you work with sole proprietors or only limited liability companies?
We work with both sole proprietors and limited liability companies. We work under contract and accept payment by bank transfer. Site visits are free.
Other services in this area
High rise window cleaning
We clean glazing at height: panoramic windows, large glazed panels, glazed roofs and atriums. We work on both the exterior and interior, floor by floor, without stopping tenants' operations.
Learn moreIndustrial rope access
Rope access to facades, roofs and structures where scaffolding and truck-mounted lifts are impractical or disproportionately expensive. Industrial rope access is a method of access; the specific work is planned around it.
Learn moreCleaning hard-to-reach structures
Entrance canopies, overhead structures, metalwork, signs, atrium roofs and advertising elements: areas reached by neither premises cleaning nor standard facade washing.
Learn more